Double Glazing Window Locks Repairs
Double glazing window locks repairs are essential to ensure your home is secure. A damaged hinge or handle could let draughts in to your home and make windows vulnerable to burglars.
Fortunately, it's not difficult to fix stiff uPVC locks and handles without having to replace your door or window. Simply cooling or oiling the mechanisms can often help resolve any issues.
Broken Glass
Double glazing window locks can wear out over time. When this happens, the handles can become difficult to open or even lock shut. This could cause problems with ventilation, and could also could pose a security risk. It is crucial to have the window repaired as quickly as you can.
Double-glazed windows are made up of two or more glass panes, with gas in between them to provide insulation. Seals also hold the panes together. Condensation between the glass panes is usually an indication that there is an issue with one of these seals, and will need to be replaced. It is usually only replacing one pane of the window which is much less costly than replacing the entire glass window.
Condensation and cloudiness are usually caused by a blowing seal on a double-glazed window. This could be due to a number of causes, including air leaks or an excess amount of moisture in the property. It is important to call a double glazing specialist to fix the gas and seal in your double-glazed window when you spot this problem.
It is possible to replace a single pane of double glazing glass, however, it is not advised to do it without the help of an expert. It is necessary to have the right tools and know-how to complete the task safely. You could end up damaging the window frame, or your health if you attempt to do it yourself.
A lot of people utilize a crowbar in order to open their double glazed window when it is stuck, but it will typically leave the window frame damaged and scratched. A window specialist can remove the handle from the window and allow it to open without causing any further damage. They can also change the old window mechanisms into modern ones.
As double glazing window repairs , window hinges will become stiffer and difficult to open, especially in areas that are noisy. It is important to regularly grease your window hinges with silicone spray. It is also essential to avoid shutting the window too tightly or closing it with the handles since this could cause damage to the hinges and lock mechanism.
Broken Sash
This is a typical issue for older double-glazed windows. It isn't easy to lock and open a windows if the upper sash is not in of its pocket. This is usually due to pins being disengaged or a balance shoe is disconnected. Every sash is unique and it is important to understand how yours is configured before you attempt to fix this.
The best solution to this is to remove the sash and clean it thoroughly. This will also show whether the sash remains in good alignment. If not, add stoppers for the sash to hold it in place. You can purchase them from most hardware stores or online. After cleaning the sash, you can replace the parting beads and lubricate the pulley axles with Teflon or silicon spray. Label the weights prior to removing them to ensure that you are able to reinstall them correctly.
Another issue that is frequently encountered is a broken handle. Window handles can be difficult to detect however there are a few indicators that tell you if yours is broken. If the handle is spongy or stiff, or doesn't feel secure, it's probably broken.
This could be due to a simple lack of use or use, but it's also possible that the handle has cracked or even become detached. In some instances the handle could be damaged inside and cannot be replaced, but it's still worth attempting to fix it as soon as you notice the issue.
You may have to unscrew the hinges that hold the window sash to the frame to take it off. It can be a difficult job, so you'll need someone to assist you in holding the sash securely. After removing the hinges, it is important to wash the space around them. It is also recommended to reattach the hinges and test the handle to be sure it's functioning properly. If it's not, you may want to consider replacing it. This will ensure that your window is as secure as can be.
Broken Handle
It is not unusual for the window handle to break or deteriorate over time. It is crucial to repair any damaged handles as soon as you can to avoid security and functionality issues.
Fortunately, it's easy to change a window handle. The window handle can be easily repaired by anyone with DIY skills. Unlike the sash which is secured using multiple bolts, it only requires one or two screws. It's important to test the handle once it's been installed to make sure that it is working correctly. This includes locking the handle and looking for gaps that might allow drafts to enter your home or allow opportunistic burglars access.
The most common reason for a damaged window handle is that it's simply worn down from repeated use. A damaged handle could also be the result of excessive force or stress. A window that is smashed or forced open can place additional strain on the handle and increase the chance of damage, so it's best to carry out every handling task slowly and gently.
Other causes for a damaged handle are poor maintenance, ageing or design issues. The handle may wear out prematurely because of a lack of regular cleaning and oiling. This is often caused by dirt or other debris that has built up over time. In addition, the handle can be weakened by incorrect installation and alignment problems.
If the previously mentioned fixes aren't successful then the Tasker may need to gain access to and remove the lock mechanism itself. This can involve removal of the frame or 'breaking out' the window frame as well as bead made of plastic (to give the Tasker more room to maneuver). A replacement lock may then be fitted which matches the shape of the current uPVC handle. The new handle will be put back on and the process can be completed. Tasker will give you an estimate for the cost of repair in the event that this is the case.
Lock is faulty Lock
It's important that you fix any broken window locks as soon as possible. A damaged window can lead to the door to open, causing draughts and make the home vulnerable to burglary. Window lock repair is typically an easy task, but it is better to let an expert handle the issue before it becomes worse and will cost you more in the end.
UPVC window locks have two varieties: espagnolette handles as well as the cockspur handles. The first uses a central rod to operate the mushroom-like locking cams that lock into window frame keeps. The lock's mushroom cams are activated by a handle that is connected to the spindle. The latch of the lock clips into the mortise and is able to catch the window frame.
Both kinds of UPVC windows locks are prone to damage, especially in older homes. This could happen when the sash becomes warped or misaligned, or even becomes loose. In these instances, the lock must be reinstalled in order to stop draughts and loss of energy efficiency. A Tasker can replace the defective locks for you and provide peace of mind knowing that your windows are safe from intruders.
A Tasker will first examine your double glazing window and identify the issue. Once they have all the details they need, they will get their tools set and arrive at your house. They'll typically bring a Phillips-head screwdriver, needle-nose pliers, wood putty and fine-grit paper.
Tasker will have to loosen screws that secure both locks on the window frame, if the sash is not aligned correctly. They'll then remove the latch and then fill the mounting holes with wood putty (if applicable) and sand the area until it's flush with the rest of the window frame.
If the lock is rusted they'll clean it with wire brush or oil and then lubricate it with grease to keep it working smoothly. They'll also check if the latch is in a good condition and re-install it.